For basements and slab foundations
Tell us about your foundation and a certified radon professional who serves Davis County will call you back with a free estimate.
Sub-slab depressurization is the standard fix for a home that sits on a concrete slab or has a basement floor. The EPA, which also calls it active subslab suction, describes it as the most common and usually the most reliable radon reduction method.
Utah DEQ explains that buildings typically sit at a lower pressure than the surrounding air and soil, so radon and other soil gases are drawn in through cracks in the slab, floor-to-wall joints and control joints. A sub-slab system works against that pull. It creates a vacuum beneath the foundation that is stronger than the one the house applies to the soil, so soil gas moves into the pipe instead of the living space.
The EPA lists typical radon reductions of 50 to 99 percent for subslab suction and says results are strongest when air can move easily in the material under the slab. Sealing cracks alongside the system makes it more effective, but the EPA does not recommend sealing as the only step.
The Utah Geological Survey notes that the lower benches of Davis County are underlain by highly permeable sand and gravel, and that permeable soil lets radon move upward more easily. Whether the material under your own slab lets air move well is something a professional checks on site.
We are a referral service. Ask about sub-slab depressurization in Bountiful and we pass your request to an independent, certified radon professional who serves Davis County. They inspect, design the system and give you a free estimate.
Not every slab is the same. These are the versions of soil suction the EPA describes for basement and slab-on-grade homes.
One or more pipes through the slab, with a fan. The EPA lists a typical reduction of 50 to 99 percent.
The same pipe without a fan, usually found in newer homes built with radon-resistant features. The EPA lists 30 to 70 percent and says it is not as effective as an active system.
If the basement has a sump pit, the EPA says it can be capped so that it keeps draining water and also serves as the location for the radon pipe.
For basements with hollow block foundation walls. The EPA says it is often used in combination with subslab suction.
| Item | Published figure | Source |
|---|---|---|
| Active sub-slab system, installed | Around $2,000 | Utah DEQ |
| Active system in an existing structure | Typically $1,200 to $1,700 | Utah Geological Survey |
| Electricity to run the fan | About $8 to $10 per month | Utah DEQ |
| Replacement fan | Needed after about 15 years, price varies | Utah DEQ and EPA |
These figures are quoted from the Utah Department of Environmental Quality, the Utah Geological Survey and the EPA, and are typical figures, not quotes. The EPA says costs vary with the size and design of the home. A certified pro gives the actual quote after seeing your foundation.
Your request reaches a certified professional who can look at the slab, the material under it and the pipe route before recommending a system.
You see the price before you agree to anything. The estimate from the professional costs you nothing.
Those are the credentials we look for. Both programs offer a public search where you can confirm them.
We do not sell systems. We pass along your request, and the decision to hire is yours.
Basement or slab home with a high radon result? Send the details and a certified professional will follow up with a free estimate.
Free — no obligations
Tell us the radon reading, whether the home has a basement or slab, and whether there is a sump pit.
A certified radon professional calls you back and looks at the slab, possible suction points and where the pipe and fan can go.
The quote covers the design they recommend. Utah DEQ suggests comparing at least three bids.
After installation, the EPA recommends a follow-up test within 30 days, no sooner than 24 hours after the fan starts.